null

TouchUpDirect Aerosol Matte Clearcoat

$21.00
Size *
  • Description

    Our Matte Clearcoats are specifically designed to match the most common finishes offered by manufacturers. We offer finishes ranging from very Matte (think chalkboard) to semi-gloss. We have 5 levels of Matte finish: 

    • FC01 – Flat. Common with interiors and auto trims. Some motorcycles have this level of Matte. 
    • FC02 – Matte. This is a less common level of Matte. This is still dry looking but will have some sheen. 
    • FC03 – Eggshell. This is our most common finish especially for motorcycle colors. FC03 has a slight sheen and silkiness to it. 
    • FC04 – Satin. Seen with some motorcycle manufactures that are going for a Matte look but want their colors to shine. Less common than FC03. 
    • FC05 – Semi-gloss. This is very common with automotive manufactures like Mercedes and BMW. This has a very obvious sheen to it and will look very silky when dry. 

    Note: If you are unsure about what Matte finish you need, please reach out to our customer support so they can help guide you.

    Product Description 

    • Resistance to abrasion and scratching 
    • Very smooth flow 
    • Desired level of Matte Ideally suited for large surfaces 

    Sold individually. 13.5oz aerosol.

    1. Assess Colorcoat application. Clearcoat will highlight any imperfections, so make sure issues with the Colorcoat are fixed before applying Clearcoat.
    2. Shake well. Periodically shake between sprays. Aim can in a safe direction, away from anything that should not be painted. Test spray the can 1-2 times with a quick spray to clear the nozzle and ensure the can is functioning properly.
    3. Holding can 6-8 inches from the face of the target area, begin spraying your first pass 1-2 inches before the actual target area. Continue holding the spray trigger for 1-2 inches past the target area. Using the same technique as the previous pass, continue to apply strokes until the surface is evenly covered. Overlap the previous pass by 50% to ensure thorough coverage.
    4. Apply 2-3 coats using the same methods used earlier. Let paint dry for 15-30 minutes between coats. When finished, aim can in a safe direction, hold can upside down and spray 2-3 quick bursts to clear nozzle.
  • How to
  • FAQ
!
Cart Cart Search Search Help Desk Help Desk